FAQs

• Surface Reinforcement • Erosion Protection

Yes, but mowing is recommended prior to application

GrassGuard® is a green plastic mesh used to reinforce and strengthen grass surfaces.

• Concrete pavement requires substantial site prep: clearing and grubbing, excavation, forming and then pouring and leveling of concrete. Concrete pavement is impervious and typically requires stormwater detention. • Porous concrete and certain concrete pavers are considered pervious options; however, both require similar site prep as concrete pavement with the addition of an aggregate drainage layer. • GrassGuard® installation requires little to no site prep. Simply mow grass, roll product out and secure using sod staples or pins

• A temporary solution is to paint the lines. • A permanent solution is to install yellow plastic soil markers to delineate the lines

• You can seed either before or after installation. The open space in GrassGuard® allows for the seed to make contact with the ground. • If you are installing on a slope, it is recommended to install a double net straw blanket or equal over the seed prior to installation of GrassGuard® . The straw blanket will prevent erosion, secure the seed, trap moisture and heat to promote growth.